Daily 8 AM–8 PMWater running? Close the main shut-off first.

Rapid Response Plumber of Garland

Backflow Prevention Testing Plano, TX

Backflow prevention testing in Plano comes with a quoted price before the gauges go on the assembly and a plain explanation afterward: which valve held, which did not, and why. If the assembly fails, you get a separate quote for the repair, and nothing is fixed until you approve it.

Plano homes and backflow prevention testing

Plano treats backflow testing as a yearly duty. Every assembly must be tested annually, and again right after it is installed, relocated or repaired, or after work upstream of it. on top of the state tester license, the person doing it must be a tester registered in Plano for the current year, which is done in person at the city's meter shop on W Plano Pkwy. Ask to see both before the test, and know that the city charges its own fee for each annual report, separate from the tester's bill.

at most houses that have one, the assembly sits on the lawn sprinkler line. The city's permit guide lists irrigation systems, the lawn sprinklers themselves, as permitted work, and a system with quick couplers or hose connections must be protected by a reduced pressure zone assembly, the RPZ. Testing fits around the twice-weekly schedule that runs from April through October, Mon & Thu for even-numbered addresses and Tue & Fri for odd, with no sprinklers between 10 in the morning and 6 at night, so a midday test does not cut into a scheduled cycle. Leave the controller off for the test, then switch it back on once the result is in.

Sprinklers are not the only case. The city's backflow sheet lists an RPZ as the protection for a water softener, and its permit guide lists softeners as well, so a water softener permit and a testable assembly come with that installation. The same sheet calls for an air gap where a water heater's relief line drains. An assembly above ground can crack in a hard freeze of the February 2021 kind. Wrap it before the first hard cold, drain it if the sprinkler system is shut down for the winter, and have it tested again after any repair.

When an assembly needs testing

  • A notice from your city's water department saying a test is due
  • A sprinkler system that is brand new or freshly repaired
  • An assembly that froze in a hard winter, or has a cracked body
  • Water dripping or spraying from the device while the sprinklers are off
  • A house purchase where the irrigation system's history is unknown

Questions from Plano

How do I know when my Plano backflow test is due?

Once a year, and again whenever the assembly is installed, moved or repaired. Since February 1, 2022, Plano's registration and testing records have been kept by Backflow Solutions, Inc. through BSI Online, and each test report is due within 10 calendar days of the test. If you have lost track, the last test report shows when it was done.

We just bought a house in 75025 with sprinklers. What should we do about backflow?

Find the assembly first, usually near the house where the irrigation line leaves the main supply, and ask the sellers for the last test report. If no test is on record for this year, book one. If the system has quick couplers or hose connections, check that an RPZ protects it, since the city requires that type for those connections.

Do I need a backflow test?

If your water utility has sent a notice, yes, by the date on it. Otherwise an assembly is tested when it is first installed and again after any repair.

Booking in Plano

Have the city's notice to hand, with its deadline and any make, size or serial number it lists for the assembly. Call (972) 627-4926, 8 AM until 8 PM seven days a week, and say where the device is and whether the sprinklers have been leaking.

Backflow Prevention Testing in other cities

Something leaking? Start with the valve.

Call now