Daily 8 AM–8 PMWater running? Close the main shut-off first.

Rapid Response Plumber of Garland

Backflow Prevention Testing Dallas, TX

Backflow prevention testing in Dallas comes out of our Garland office, about 16 miles away by I-30, and the result is explained in plain words: which check valves in the assembly held, which did not, and what a failed part means for the repair and the retest.

Dallas homes and backflow prevention testing

Homeowners here are not required to test a lawn sprinkler backflow device every year. Dallas Water Utilities requires a test when an irrigation device is newly installed, repaired or replaced, and not otherwise. High-hazard assemblies are another matter: those must be tested every year by a tester registered with the City of Dallas. If your device protects a lawn system and has not been touched, a letter demanding an annual sprinkler test deserves a second look before you pay anyone. A required test is easy to fit around the watering rules, which allow sprinklers twice a week at most and keep them off through the middle of the day from April to October; a test on a day off the schedule costs the lawn nothing.

Results go through SwiftComply, the online system DWU uses for backflow test reports, and a tester has to be registered with the city's Building Inspection and enrolled in SwiftComply before filing one. Since September 25, 2026, DWU has handled the test reports tied to permits in SwiftComply and passed them on to Planning and Development. the rules themselves sit in Chapter 49 of the city code, Section 49-29, with the irrigation details in the plumbing code's Appendix G.

A sprinkler repair brings in more of that code. When a Dallas irrigation system without a backflow device is repaired, one has to be installed, permitted, tested and inspected; an existing device is tested and its report handed to the building official. the device belongs within 10 feet of the water meter. New systems and repairs, a backflow replacement included, need an isolation valve and a Y-strainer between the meter and the device and a master valve after it, and every automatic system needs rain and freeze shut-off sensors set to stop it at 37 degrees or below.

When an assembly needs testing

  • A notice from your city's water department saying a test is due
  • A sprinkler system that is brand new or freshly repaired
  • An assembly that froze in a hard winter, or has a cracked body
  • Water dripping or spraying from the device while the sprinklers are off
  • A house purchase where the irrigation system's history is unknown

Questions from Dallas

My device cracked in a hard freeze. What happens next?

In cold like February 2021, an exposed assembly can split its body or crack a check valve. Close the irrigation shut-off, then have the device repaired or replaced. The city requires a test of the repaired or new device either way, and a replacement also brings in the isolation valve, Y-strainer and master valve if the system lacks them.

I got an email about my backflow test. Is it really from the city?

Dallas warns residents about phishing, and its real email comes from dallas.gov addresses. If a message asks for payment or a login and comes from anywhere else, do not click it. Questions about a backflow notice can go straight to the DWU backflow office, which can confirm whether a test is actually due.

Do I need a backflow test?

If your water utility has sent a notice, yes, by the date on it. Otherwise an assembly is tested when it is first installed and again after any repair.

Booking in Dallas

Have the city's notice to hand, with its deadline and any make, size or serial number it lists for the assembly. Call (972) 627-4926, 8 AM until 8 PM seven days a week, and say where the device is and whether the sprinklers have been leaking.

Backflow Prevention Testing in other cities

Something leaking? Start with the valve.

Call now