Rapid Response Plumber of Garland
Bathtub Installation Garland, TX
Bathtub installation in Garland starts with getting the old tub out and the new one in through the door, which takes more planning than people expect. We work 8 AM until 8 PM every day from Broadway Blvd, and the whole job is explained and priced before it begins.
- Price first, work second
- Tested before the plumber leaves
What bathtub installation involves
Most bathtubs in Garland homes are a standard five-foot alcove tub set between three walls. A replacement of the same size, with the drain at the same end, is the simplest job. A freestanding tub, a deeper soaking tub or a jetted tub changes the plumbing: the drain may move, the valve and spout may move to another wall or to the floor, and a jetted tub needs its own electrical supply.
Removing an old steel or cast iron tub usually means cutting away the bottom row of tile or drywall around it, and a cast iron tub may be broken up to get it out of the room. With the old tub gone, the drain, overflow and valve are inspected. the new tub is set level on a mortar or foam bed so it does not flex, the waste and overflow are joined up, and the tub is filled and checked for leaks before the wall around it is finished.
Reasons to replace a bathtub
- Chipped, cracked or worn enamel that refinishing will not fix
- A tub that flexes or creaks when you stand in it
- Leaks from the drain or overflow that keep coming back
- A remodel, or a wish for a deeper or freestanding tub
- A tub that is hard for someone in the house to step into
On site
How the visit goes
Measure and plan
The space, the drain end and the path through the house are checked before you choose a tub.
Price it
You hear the price for removal, the new drain and overflow, any valve work and the installation.
Remove and set
Out comes the old tub; the plumbing behind it is inspected, then the new tub is leveled and hooked up.
Fill and test
The new tub is filled until water reaches the overflow, then emptied, with every joint watched before the wall is finished.
Local conditions
Bathtub Installation in Garland
In Garland's slab houses the tub drain sits in a pocket formed in the concrete when the slab was poured, so its position is fixed unless the floor is opened. Choosing a new tub with the drain at the same end saves concrete work. In older homes the tub valve is often as old as the house, and a tub replacement is a sensible time to change it too, while the wall is already open.
Bathtub Installation: what people ask first
Will the new tub fit through my door?
That is one of the first things checked. Most standard tubs go through a bathroom door on edge, but larger or one-piece units may not, and the path through the house matters as much as the bathroom door.
Should I replace the valve with the tub?
If the valve is old or its parts are hard to find, yes. The wall around it is usually open for the tub anyway, which makes it the cheapest time to do it.
Who finishes the wall around the tub?
The plumber handles the tub, the drain and the valve. The wall is usually finished by a tile installer or contractor, or with a surround kit.
How to book bathtub installation in Garland
Call (972) 627-4926 from 8 AM until 8 PM, seven days a week. Have the size of the current tub, the end its drain is on and the kind of tub you want instead. Mention it if the bathroom is upstairs or the old tub is cast iron, since both change the work.
Ready to book? The price comes first.
Say what you are seeing and what you have already shut off. the cause and the cost are explained before a tool comes out.
